Professional Specifications
Design storefronts, curtain walls, and entrance systems with thermal analysis, wind load calculations, ADA compliance verification, and real-time SVG preview.
2
Lites
60.0"
Lite W
96.0"
Lite H
Min 32" clear opening
Max 5 lbs (interior) / 8.5 lbs (exterior)
Min 5 seconds from 90 to 12 deg
34" to 48" above finished floor
Max 1/2" height
Frame
Dark Bronze
Glass
IGU with Low-E
Hardware
Dark Bronze
Finish
Anodized
U-Factor
0.34
BTU/hr-ft2-F
SHGC
0.34
Solar Heat Gain
VT
0.53
Visible Trans.
CR
73
Condensation R.
STC Rating
41
Excellent acoustic isolation
Air Infiltration
0.06 cfm/ft2 @ 1.57 psf
Water Resistance
6.0 psf (AAMA LC-25)
Material Estimate
Referenced Standards
AAMA 101/I.S.2
North American Fenestration Standard
ASTM E330
Structural Performance of Exterior Windows
ASTM E1300
Determining Load Resistance of Glass
NFRC 100/200
Fenestration U-factors / SHGC
IBC Ch. 24
International Building Code -- Glass and Glazing
IECC 2021
International Energy Conservation Code
ADA Standards
ADA Standards for Accessible Design
ASCE 7-22
Minimum Design Loads for Buildings
Our commercial glazing specialists will review your configuration, verify specifications for your specific building, and provide a detailed project proposal -- all at no cost.
Fully Insured | Serving DC, MD & VA
Our commercial glass configurator helps architects, contractors, and building owners specify glazing systems with confidence.
Calculate U-Factor, SHGC, and visible transmittance to ensure your glazing system meets IECC 2021 energy code requirements for the DMV region.
Run ASCE 7-22 compliant wind pressure analysis with velocity pressure coefficients for your building height and exposure category.
Verify door clear openings, operating force, closing speed, handle height, and threshold height against ADA Standards for Accessible Design.
Evaluate fire-rated assembly options from 20-minute to 90-minute ratings with automatic glass type filtering and performance impact calculations.
Calculate glass weight, thickness requirements, and specifications.
Open ToolDesign custom shower enclosures with glass options and hardware.
Open ToolDesign custom mirrors with LED lighting and frame options.
Open ToolConfigure commercial door systems with ADA compliance checks.
Open ToolThis Commercial Glass Configurator is provided as a complimentary visualization and planning resource to help you explore design options and understand approximate configurations for your glass project. All dimensions, specifications, performance calculations, and visual representations displayed are estimates intended for planning purposes only and should not be used as final construction measurements or guaranteed performance values.
Accurate field measurements and assessments by a licensed glass technician are required before any fabrication, installation, or purchasing decisions. Site conditions, structural factors, building codes, and environmental variables can significantly affect final specifications and product selection.
Expert Glass Repair provides complimentary on-site assessments and professional consultations throughout the DC, Northern Virginia, and Maryland metro area. For precise specifications and a free estimate, contact our team at (703) 679-7741.